CURRENT USED EQUIPMENT FOR SALE
1-800-535-0564
Pictures upon Request |
| Complete Shop | Crank Grinders | Block | Rod | Surfacing | Cylinder Head |
| Cleaning | Brake Lathes | Flywheel Grinder | More Shop
Equipment | Tooling | |
COMPLETE SHOP |
| |
Rottler SF8M CBN Surfacer W/4" mill & leveling table
SOLD |
$23,000.00 |
| |
|
Click for Pics |
| |
Rottler SGF8M Seat & Guide
Machine Complete Tooling, SOLD |
$23,000.00 |
| |
Rottler F8A Boring Machine 2 Heads W/ Setting Fixtures, SOLD |
$26,000.00 |
| |
Rottler HP6A Diamond Hone W/ 4 Heads, Complete SOLD |
$26,000.00 |
| |
Hines Dominator Crank Balancer W/ Extended Base & All Accessories
*** |
$23,000.00 |
| |
|
|
| |
Berco 260 Crank Grinder W/ HYD Dresser, 9 Hubs Wheels, Rebuilt 2004
sold |
$21,950.00 |
| |
Rimac 500 lb. Spring Tester ****** |
$395.00 |
| |
Sioux 2075HPA Valve Refacer SOLD |
$3,895.00 |
| |
Van Norman FG5000 Flywheel Grinder **** |
$6,395.00 |
| |
Zero Glass Bead Cabinet and Reclaimer
**** |
$2,995.00 |
| |
AXE 2840 Gas Heated Wash Cabinet W/ Hot Tank
**** |
$8,995.00 |
| |
AXE 2233 Gas Heated Wash Cabinet W/ Hot Tank
**** |
$4,995.00 |
| |
AXE Rinse Booth (like new) **** |
$1,795.00 |
| |
Storm Vulcan Straightening Press SOLD |
$1,695.00 |
| |
50 Ton Hydraulic Press **** |
$1,995.00 |
| |
Van Norman Grinder / Polisher SOLD |
$1,295.00 |
| |
Peterson 966 Welder **** |
$3,995.00 |
| |
Tobin Arp TA14 Line Bore Complete **** |
$3,495.00 |
| |
Sunnen LBB1810 Hone W/ Rings, Mandrels, Guage
***** |
$4,995.00 |
| |
Sunnen CRG750/770 Cap Grinder **** |
$1695.00 |
| |
Sunnen PB10 Hydraulic Press **** |
$1,595.00 |
| |
Bel Aire 15 HP/120 Gal. Air Compressor **** |
$3,495.00 |
| |
Sioux Hard Seat Grinder Set Almost New **** |
$1,395.00 |
| |
K-Line Electric Rod Heater **** |
$495.00 |
| |
****MAKE OFFER MUST SELL 80% of Equipment New in 2005 Very Little Use |
|
|
SPECIAL - SPECIAL - SPECIAL |
Special Blowout Sale on NEW Renegade Hot Water Soap Sinks. While
supplies last!
FOB ID Warehouse
Unlike any other cleaning sink on the
market. Eliminate harmful solvents. Easy on-site service. Dispose of
waste on premises. High Pressure/High Volume. Low cost maintenance.
Portable for parts cleaning & as a brake cleaner. |
$2,995.00 |
|
|
|
|
SNAP-ON
counselor II scope, cabinet, printer,4 gas (J) |
$2,000.00 |
SUN Scope
with 4 gas (J) |
$1,800.00 |
Century
antifreeze coolant flush/recycler (J) |
$350.00 |
| CRANK GRINDERS |
| Stewart Warner balancer
complete |
$3,900.00 |
| PORTABLE CRANK POLISHER
SOLD |
$450.00 |
| Storm straightening press
(F) |
$1,700.00 |
| 1 Gallon Soluble oil Reg.
26.95 |
$15.95ea |
| |
|
Bench top crank polishing motor w/ 2 jaw
chuck and tail stock (A) |
$495.00 |
| BLOCK |
| Boring Bars |
Pair of Block Roll Over
Fixtures |
$65.00 |
| SUNNEN 15RY4500H line hone
mandrel |
$1,900.00 |
| ROTTLER F2B BORING BAR(L)
NEW LOWER PRICE |
$5,995.00 |
| Tobin Arp TA14 with tooling
(F) |
$3,995.00 |
| Winona /Serv E Quip small cyl
boring system CB1401 LIKE NEW |
$4,995.00 |
Rottler Sharpener (C) |
$495.00 |
| manual ring grinder |
$50.00 |
WINONA
CB22XL Air Float Boring system (J) |
$7,900.00 |
Sunnen Style Tool
Bit Sharpener (C) |
$395.00 |
| Van Norman 944S recon excellent
cond. |
$1,995.00 |
| Van Norman 944S bar with
tooling (A) Click For Pictures |
$1,695.00 |
| Van Norman 777 Bar with
tooling Click For Picture |
$1,795.00 |
| Van Norman 777S bar w/ main
hold down (A) Click For Pictures |
$2,395.00 |
| HANCOCK/TRUSTY BLOCK BORING BENCH |
$495.00 |
| |
|
Cylinder Hones |
Cylinder Leak Down Test
Kit (C) MORROSO |
$55.00 |
| SUNNEN CK21 like New |
$32,950.00 |
| AMMCO small bore hone kit 7/8
to 1 1/4 |
$45.00 |
| SUNNEN
AN112 HONE W/ STROKE FIXTURE |
$350.00 |
| SERV-EQUIP power stroke hone very good condition 2300 |
$4,695.00 |
| MITUTOYO DIAL BORE GUAGES FROM $50.00 TO
$150.00 |
|
Sunnen & Peterson Style
Honing Stones 25% off regular price - CLOSE OUT |
$CALL |
| Winona Van Norman friction
feed hone cab |
$3,695.00 |
Sunnen CH36 Rack (C) |
$500.00 |
ROD RECONDITIONING |
| Bench top pin vise |
$75.00 |
| PMW
PIN PRESS WITH PIN INSERT TOOLING |
$1,400.00 |
| SUNNEN rod hone stones and
shoes assorted |
call for list |
2 PL-2500
Sunnen Mandrel |
$125.00 |
| K-LINE ROD HEATER |
$295.00 |
| Sunnen AG300 guages w/ box
$995--wo/box $895 |
$895.00 |
| QUELO ROD CAP GRINDER |
$1100.00 |
1PL-1750
Sunnen Mandel |
$100.00 |
Sunnen BP10K
pin press (J) |
$1,695.00 |
Sunnen
LBB1499 Hone w/ guage , mandrels, vise and cabinet (J) |
$4,595.00 |
| Sunnen CK2605A junior hone
head ,sleeve and shaft no shims(NEW) |
$2,195.00 |
| Sunnen SL30,37 and 38 trays |
$35.00 each |
| Sunnen LBB1299 w/o guage or
mandrels |
$1,995.00 |
| Sunnen LB1A mandrel SET for
.495-.713w/rack |
$295.00 |
MB770 Sunnen Chuck for use w/
Rod Hone (H) |
$900.00 |
| Sunnen FC-E external hone for
LBB |
$495.00 |
| SUNNEN CRG600 MANDREL CABINET |
$495.00 |
Sunnen
CRG770K cap grinder GREEN UNIT(J) |
$1,595.00 |
| OTC piston pin R&R
fixture set NEW $1,100 |
$495.00 |
Sunnen LBB1699 - very good condition w/ gauge &
late mandrel sets - 2 in stock 1-HAS CABINET $4,495.00 |
$3,900.00 |
| SUNNEN CRG770 |
$1,595.00 |
Sunnen CRG750 Cap Grinder
(3)
|
$1,400.00 |
Sunnen Pin Insertion Set w/o Boards - Car Set (C) (H) |
$550.00 |
Sunnen CRH50 Rod
Heater (3 In Stock - priced each) (C) (J)(H) |
$1,095..00 |
Sunnen Stones & Shoes (New) - MISC (C) |
Call for Prices |
| Sunnen LBB1810 power stroke
hone w/ guage, mandrels and rings (L) Seller motivated consigned unit |
$4,900.00 |
| Sunnen LBB1810 power stroke
hone w/ guage mandrels &rings (C) |
$4,900.00 |
| Winona Rod Hone - Complete w/ Mandrels & Gauge
(C) LIKE NEW SOLD |
$2,900.00 |
| Sunnen
King Pin Mandrels (priced each) (C) |
$150.00 |
SURFACING |
| Peterson RSC952 GOOD
CONDITION |
$2,995.00 |
| GOODSON STUD STRETCHERS |
$25.00 |
| BERCO RSC950 with CBN head |
$4,995.00 |
| VAN NORMAN 555 STONE GRINDER |
$995.00 |
Van Norman Broach Angle Plates
for Chevy/Ford - pair |
$80.00 |
STORM/ROBBI
ALPHA10 CBN surfacer (J) SOLD |
$6,995.00 |
| CYLINDER HEAD |
| Valve Refacers |
| SIOUX valve refacer cabinet
LIKE NEW |
$490.00 |
| Tobin Arp VR6500 valve
refacer |
$1,995.00 |
| SIOUX 2075HPA VALVE REFACER
EXCELLENT COND sold |
$3,400.00 |
Valve refacer
oil 1 gal. reg.$19.95 |
$12.95ea |
Kwik-Way VS w/ Table (B) |
$1,400.00 |
Pressure Testers / Ovens |
| HEAD STRAIGHTENING
PLATE (NEW) |
$175.00 |
| AXE/ T HOFF pressure tester |
$2995.00 |
| Pollutuin Control DC11 oven
very clean |
$3000.00 |
| ELEC.HAND MAG |
$200.00 |
PT 38 Pressure Tester ((A)
|
$2,900.00 |
ATE
Head straightening oven (J) SOLD |
$695.00 |
Peterson PT 38 Pressure Tester
(MasterTool) (C) |
$2,500.00 |
Seat Grinders |
| AIR C CLAMPS FROM $175.00
MANUAL FROM $45.00 |
|
| SNAP ON BLUE POINT SEAT
GRINDER SET LIKE NEW |
$795.00 |
| SUNNEN HS30 GUIDE HONE
w/ tooling SOLD |
$2,195.00 |
| SIOUX ELEC. SEAT GRINDER KIT W/ O BOX
SOLD |
$690.00 |
| SIOUX CONCENTRICITY GUAGE |
$70.00 |
Seat & Guide Machines |
K-Line Head Roll Over Assembly
(J) |
$495.00 |
| SPEED REDUCERS REG.&HEAVY
DUTY F/$95.00 |
|
| set of NEW seat cutters
Peterson /kwikway 5/8 center |
$750.00 |
| WINONA V/N PH2000L LATE MODEL SEAT/GUIDE UNIT |
$5,995.00 |
| SPRING SEAT CUTTER SET
$100.00 |
|
Sunnen VS1005 Rapid Valve Seat
Run Out Checker (J) |
$395.00 |
| PETERSON SRA30 HEAD
ASSEM. BENCH |
$1,800.00 |
WINONA PH6000
late model seat & guide machine w/ 3 angle tool (J) SOLD |
$6,500.00 |
| QUELO SPRING COMPRESSOR TABLE SOLD |
$1,495.00 |
Valve Guide OD Tools Pilot and
Body - each (C) |
$35.00 |
Valve Spring Seat Cutters
Pilot and Body - each (C) |
$35.00 |
Peterson TCM25 - Good
Tooling (B) |
$5,995.00 |
25 HP
RotoPhase (J) |
$1,200.00 |
Acer 10X50 Deck Mill w/ Sony
DRO variable speed (B) |
$10,500.00 |
Durabond
OHC overhead Cam boring tool QS-2 (J) |
$1,295.00 |
| SILVER SEAL CAM BORE CUTTERS
& BUSHINGS/NO BAR |
$595.00 |
Portable Seat/guideCutter Kits (C) several to
choose from |
$100.00ea |
Diesel pre
comb. chamber re-bore kit NEWEN (NEW) (J) |
$1,950.00 |
Goodson 90N Reamer Kit LIKE NEW (C) |
$200.00 |
CLEANING |
| INSERT
STYLE FILTER CABINET 15X48
NEW UNIVERSAL |
$195.00 |
| FOR
GLASS BEAD CABINET |
|
PETERSON PB10 CLAM SHELL HOT WATER PRESSURE WASHER DEMO
UNIT NEW $4200 (C) |
$2,995.00 |
| K/I 24x48 glass bead
cabinet/WITH RECLAIMER |
$1,695.00 |
| STEELABRATOR PARTS TUMBLER |
$645.00 |
|
Renegade 4000detergent SPECIAL |
$65.00ea |
| CUDA
H/D POWDER RECIRC. DETERGENT $95.00EA |
$95.00ea |
SNAP-ON spray
cabinet (J) |
$1,400.00 |
| NEW
CUDA 2530 FRONT LOAD SPRAY CAB 220V-1ph regular$8950 |
$4,995.00 |
| NEW
CUDA 2216 TOP LOAD 220V/1ph regular $5220 |
$3995.00 |
Peterson D30 Gas Spray Cab -
Recently Reconditioned (D) |
$2,900.00 |
Kleer Flo
solvent tank (J) |
$150.00 |
EMC 2846 Spray Cab - NEW - Regular Price
$5,955.00 |
$4,995.00 |
Kwik-Way Typhoon, Large Top-load Washer Gas Fired (H) |
$1,600.00 |
Pollution Control DC II Oven (S) |
$3,000.00 |
Renegade Wash Sink TMB4000 - Demo Unit (C) |
$1,995.00 |
| Universal
24X36 Pressure Pot System w/ Filter Cabinet (C) |
$1,500.00 |
BRAKE LATHES |
| AMMCO 3850 drum/disc lathe
like new |
|
| AMMCO TRIANGLE BITS 10 PAKS |
$24.95 |
Van Norman 2" Mandrel w/
Tooling (C) |
$450.00 |
STAR AIR/HYD
RIVETER W/ BENCH DRILL & TOOLING |
$895.00 |
| LATE MODEL AMMCO HARD SPOT
GRINDER |
$795.00 |
| Ammco
Shoe Arcer (C) |
$200.00 |
| AMMCO 4000 DRUM&DISC LATHE
(L) |
$2,995.00 |
| Ammco 900 Tool Arbor for Flywheels (C) |
$100.00 |
FLYWHEEL GRINDER |
| WINONA 1ph flywheel grinder
older unit runs good with tooling |
$2,900.00 |
| WINONA FG5000 FLYWHEEL GRINDER/LATE MODEL |
$5,995.00 |
MISCELLANEOUS |
| OLDER NAPA 4 TON FLOOR
JACK |
$175.00 |
| NAPA 50 TON AIR/HYD PRESS LATE MODEL#91-622 |
$1,800.00 |
| NAPA 71/2 HP HEAVY DUTY
COMPRESSOR |
$1,700.00 |
Time clock
with rack (J) |
CALL |
| 30 MOTOR MANUALS
1977-99 |
$175.00 |
| 4X6 METAL WELDING OR WORK
TABLE PLUS FORMED 10-12 FT METAL TABLE TOPS |
CALL |
| WALKER CHERRY PICKER |
$495.00 |
| WALKER TRUCK TRANSMISSION
JACK floor unit |
$800.00 |
|
|
Snap Lock Nozzle Hose Kits
Small & Large at 1/2 off |
$CALL |
Set of Mechanical Read-Out
Micrometers - 0"-6" - Missing 1-2 and 2-3 - set of 4 Mics and Box |
$125.00 |
King Pin Reamers - Reg $90+ -
USED from $45.00 |
From $45.00 |
Century
antifreeze coolant flush/recycler (J) |
$350.00 |
| SIMTEST QT150 diesel
unit FACTORY REBUILT 10H/P |
$13,995 |
Sim-Test QT150 Test station -
very clean (C) WITH EXTRAS |
$7,995.00 |
Metal Band
Saw (C) |
$175.00 |
Nugier AXLE ADAPTOR CABINET WITH ALL PRESS FIXTURES |
$695.00 |
| 3.9HP
MERCURY OUTBOARD $295.00 |
|
|
|
Metal Band Saw (H) |
$400.00 |
|
|
| Prices/Availability
Subject to Change Without Notice |
